运维开发网

Kolla-Ansible在线部署OpenStack

运维开发网 https://www.qedev.com 2020-08-07 10:12 出处:51CTO 作者:孟伯
上传这篇实战性文档是因为一个同行想让我手把手地教他部署OpenStack平台。用Kolla-Ansible在线部署OpenStack平台,其实就像用 yum 或 apt 在线安装Linux的软件包一样

上传这篇实战性文档是因为一个同行想让我手把手地教他部署OpenStack平台。

用Kolla-Ansible在线部署OpenStack平台,其实就像用 yum 或 apt 在线安装Linux的软件包一样,只不过Kolla-Ansible作为一个部署工具用到的是 Python 小工具罢了。

这次实验的底本是我去年研究Kolla项目时用到的一个参考案例,因为当时没做记录忘记那篇博客的作者是谁了,自己的是在cnblog上的。

本次文档正文的内容如下:

一 OS基础环境准备

[[email protected] Downloads]$ whoami

googlebigtable

[[email protected] Downloads]$ pwd -P

/home/googlebigtable/Downloads

[[email protected] Downloads]$ echo $PATH

/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:/home/googlebigtable/.local/bin:/home/googlebigtable/bin

[[email protected] Downloads]$ su root

Password:

[[email protected] Downloads]# whoami

root

[[email protected] Downloads]# pwd -P

/home/googlebigtable/Downloads

[[email protected] Downloads]# echo $PATH

/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:/home/googlebigtable/.local/bin:/home/googlebigtable/bin

[[email protected] Downloads]# ls -F

initCentOS7aliYUM.sh* VMwareTools-10.3.10-13959562.tar.gz vmware-tools-distrib/

[[email protected] Downloads]# ll

total 55116

-rwxrwxrwx. 1 googlebigtable googlebigtable 1252 Jun 16 23:13 initCentOS7aliYUM.sh

-rw-rw-r--. 1 googlebigtable googlebigtable 56431201 Jun 13 2019 VMwareTools-10.3.10-13959562.tar.gz

drwxr-xr-x. 9 googlebigtable googlebigtable 145 Jun 13 2019 vmware-tools-distrib

[[email protected] Downloads]#

[[email protected] Downloads]# ./initCentOS7aliYUM.sh

[[email protected] Downloads]# ifconfig

ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500

inet 192.168.207.173 netmask 255.255.255.0 broadcast 192.168.207.255

inet6 fe80::cd7f:e05c:e677:a2c1 prefixlen 64 scopeid 0x20<link>

ether 00:0c:29:f0:61:86 txqueuelen 1000 (Ethernet)

RX packets 923 bytes 1168039 (1.1 MiB)

RX errors 0 dropped 0 overruns 0 frame 0

TX packets 435 bytes 33553 (32.7 KiB)

TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

ens38: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500

inet 192.168.207.174 netmask 255.255.255.0 broadcast 192.168.207.255

inet6 fe80::610f:959e:7c4e:1ddf prefixlen 64 scopeid 0x20<link>

ether 00:0c:29:f0:61:90 txqueuelen 1000 (Ethernet)

RX packets 45 bytes 6499 (6.3 KiB)

RX errors 0 dropped 0 overruns 0 frame 0

TX packets 35 bytes 5004 (4.8 KiB)

TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536

inet 127.0.0.1 netmask 255.0.0.0

inet6 ::1 prefixlen 128 scopeid 0x10<host>

loop txqueuelen 1000 (Local Loopback)

RX packets 0 bytes 0 (0.0 B)

RX errors 0 dropped 0 overruns 0 frame 0

TX packets 0 bytes 0 (0.0 B)

TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500

inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255

ether 52:54:00:8e:f4:fc txqueuelen 1000 (Ethernet)

RX packets 0 bytes 0 (0.0 B)

RX errors 0 dropped 0 overruns 0 frame 0

TX packets 0 bytes 0 (0.0 B)

TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

[[email protected] Downloads]# hostnamectl set-hostname queens

[[email protected] Downloads]# hostnamectl status

Static hostname: queens

Icon name: computer-vm

Chassis: vm

Machine ID: 4967404345494f5fbfb2194fce499588

Boot ID: 5fa3effb5624421287d6fe6cc12691c2

Virtualization: vmware

Operating System: CentOS Linux 7 (Core)

CPE OS Name: cpe:/o:centos:centos:7

Kernel: Linux 3.10.0-1127.18.2.el7.x86_64

Architecture: x86-64

[[email protected] Downloads]#

[[email protected] Downloads]# systemctl stop NetworkManager

[[email protected] Downloads]# systemctl disable NetworkManager

Removed symlink /etc/systemd/system/multi-user.target.wants/NetworkManager.service.

Removed symlink /etc/systemd/system/dbus-org.freedesktop.NetworkManager.service.

Removed symlink /etc/systemd/system/dbus-org.freedesktop.nm-dispatcher.service.

Removed symlink /etc/systemd/system/network-online.target.wants/NetworkManager-wait-online.service.

[[email protected] Downloads]# systemctl status NetworkManager

● NetworkManager.service - Network Manager

Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; disabled; vendor preset: enabled)

Active: inactive (dead) since Thu 2020-08-06 14:18:05 CST; 14s ago

Docs: man:NetworkManager(8)

Process: 3395 ExecStart=/usr/sbin/NetworkManager --no-daemon (code=exited, status=0/SUCCESS)

Main PID: 3395 (code=exited, status=0/SUCCESS)

Aug 06 14:18:05 queens NetworkManager[3395]: <info> [1596694685.8994] dhcp4 (ens33): canceled DHCP transaction, DHCP client pid 3607

Aug 06 14:18:05 queens NetworkManager[3395]: <info> [1596694685.8995] dhcp4 (ens33): state changed bound -> done

Aug 06 14:18:05 queens NetworkManager[3395]: <info> [1596694685.8995] device (ens33): DHCPv4: 480 seconds grace period started

Aug 06 14:18:05 queens NetworkManager[3395]: <info> [1596694685.9101] dhcp4 (ens38): canceled DHCP transaction, DHCP client pid 3620

Aug 06 14:18:05 queens NetworkManager[3395]: <info> [1596694685.9102] dhcp4 (ens38): state changed bound -> done

Aug 06 14:18:05 queens NetworkManager[3395]: <info> [1596694685.9102] device (ens38): DHCPv4: 480 seconds grace period started

Aug 06 14:18:05 queens NetworkManager[3395]: <info> [1596694685.9113] manager: NetworkManager state is now CONNECTED_SITE

Aug 06 14:18:05 queens NetworkManager[3395]: <info> [1596694685.9117] device (virbr0-nic): released from master device virbr0

Aug 06 14:18:05 queens NetworkManager[3395]: <info> [1596694685.9141] exiting (success)

Aug 06 14:18:05 queens systemd[1]: Stopped Network Manager.

[[email protected] Downloads]#

[[email protected] Downloads]# systemctl status firewalld

● firewalld.service - firewalld - dynamic firewall daemon

Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)

Active: inactive (dead)

Docs: man:firewalld(1)

[[email protected] Downloads]# /usr/sbin/sestatus -v

SELinux status: disabled

【查看本机虚拟化支持状态,用一下任一命令即可】

[[email protected] Downloads]# egrep "vmx|svm" /proc/cpuinfo

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc art rep_good nopl tsc_reliable nonstop_tsc extd_apicid eagerfpu pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw perfctr_core retpoline_amd ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec clzero arat npt svm_lock nrip_save vmcb_clean flushbyasid decodeassists overflow_recov succor

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc art rep_good nopl tsc_reliable nonstop_tsc extd_apicid eagerfpu pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw perfctr_core retpoline_amd ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec clzero arat npt svm_lock nrip_save vmcb_clean flushbyasid decodeassists overflow_recov succor

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc art rep_good nopl tsc_reliable nonstop_tsc extd_apicid eagerfpu pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw perfctr_core retpoline_amd ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec clzero arat npt svm_lock nrip_save vmcb_clean flushbyasid decodeassists overflow_recov succor

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc art rep_good nopl tsc_reliable nonstop_tsc extd_apicid eagerfpu pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw perfctr_core retpoline_amd ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec clzero arat npt svm_lock nrip_save vmcb_clean flushbyasid decodeassists overflow_recov succor

[[email protected] Downloads]# grep -E -o 'vmx|svm' /proc/cpuinfo

svm

svm

svm

svm

svm

svm

svm

svm

[[email protected] Downloads]# lsmod | grep kvm

kvm_amd 2177304 0

kvm 636965 1 kvm_amd

irqbypass 13503 1 kvm

[[email protected] Downloads]# grep "flags" /proc/cpuinfo

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc art rep_good nopl tsc_reliable nonstop_tsc extd_apicid eagerfpu pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw perfctr_core retpoline_amd ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec clzero arat npt svm_lock nrip_save vmcb_clean flushbyasid decodeassists overflow_recov succor

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc art rep_good nopl tsc_reliable nonstop_tsc extd_apicid eagerfpu pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw perfctr_core retpoline_amd ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec clzero arat npt svm_lock nrip_save vmcb_clean flushbyasid decodeassists overflow_recov succor

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc art rep_good nopl tsc_reliable nonstop_tsc extd_apicid eagerfpu pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw perfctr_core retpoline_amd ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec clzero arat npt svm_lock nrip_save vmcb_clean flushbyasid decodeassists overflow_recov succor

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc art rep_good nopl tsc_reliable nonstop_tsc extd_apicid eagerfpu pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw perfctr_core retpoline_amd ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec clzero arat npt svm_lock nrip_save vmcb_clean flushbyasid decodeassists overflow_recov succor

[[email protected] Downloads]# egrep -s "(vmx|svm)" /proc/cpuinfo

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc art rep_good nopl tsc_reliable nonstop_tsc extd_apicid eagerfpu pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw perfctr_core retpoline_amd ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec clzero arat npt svm_lock nrip_save vmcb_clean flushbyasid decodeassists overflow_recov succor

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc art rep_good nopl tsc_reliable nonstop_tsc extd_apicid eagerfpu pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw perfctr_core retpoline_amd ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec clzero arat npt svm_lock nrip_save vmcb_clean flushbyasid decodeassists overflow_recov succor

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc art rep_good nopl tsc_reliable nonstop_tsc extd_apicid eagerfpu pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw perfctr_core retpoline_amd ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec clzero arat npt svm_lock nrip_save vmcb_clean flushbyasid decodeassists overflow_recov succor

flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc art rep_good nopl tsc_reliable nonstop_tsc extd_apicid eagerfpu pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw perfctr_core retpoline_amd ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec clzero arat npt svm_lock nrip_save vmcb_clean flushbyasid decodeassists overflow_recov succor

[[email protected] Downloads]#

二 安装Kolla-Ansible-OpenStack的必要依赖软件包

[[email protected] Downloads]# yum install epel-release

Loaded plugins: fastestmirror, langpacks

Loading mirror speeds from cached hostfile

  • base: mirrors.aliyun.com
  • extras: mirrors.aliyun.com
  • updates: mirrors.aliyun.com

    Package epel-release-7-12.noarch already installed and latest version

    Nothing to do

    [[email protected] Downloads]# yum install -y axel vim git curl wget lrzsz gcc python-devel python-pip

    Loaded plugins: fastestmirror, langpacks

    Loading mirror speeds from cached hostfile

  • base: mirrors.aliyun.com
  • extras: mirrors.aliyun.com
  • updates: mirrors.aliyun.com

    ..................................................................................................................

    Installed:

    axel.x86_64 0:2.4-9.el7 python-devel.x86_64 0:2.7.5-88.el7 python2-pip.noarch 0:8.1.2-12.el7

    Dependency Installed:

    python-rpm-macros.noarch 0:3-32.el7 python2-rpm-macros.noarch 0:3-32.el7

    Complete!

    [[email protected] Downloads]#

    [[email protected] Downloads]# wget -O /etc/yum.repos.d/docker-ce.repo https://mirrors.aliyun.com/docker-ce/Linux/centos/docker-ce.repo

    --2020-08-06 14:38:15-- https://mirrors.aliyun.com/docker-ce/Linux/centos/docker-ce.repo

    Resolving mirrors.aliyun.com (mirrors.aliyun.com)... 111.7.88.241, 111.7.88.239, 111.7.88.238, ...

    Connecting to mirrors.aliyun.com (mirrors.aliyun.com)|111.7.88.241|:443... connected.

    HTTP request sent, awaiting response... 200 OK

    Length: 2640 (2.6K) [application/octet-stream]

    Saving to: ‘/etc/yum.repos.d/docker-ce.repo’

100%[===========================================================================================================>] 2,640 --.-K/s in 0s

2020-08-06 14:38:15 (1.07 GB/s) - ‘/etc/yum.repos.d/docker-ce.repo’ saved [2640/2640]

[[email protected] Downloads]# yum install -y docker-ce

Loaded plugins: fastestmirror, langpacks

Loading mirror speeds from cached hostfile

  • base: mirrors.aliyun.com
  • extras: mirrors.aliyun.com
  • updates: mirrors.aliyun.com

    docker-ce-stable | 3.5 kB 00:00:00

    (1/2): docker-ce-stable/x86_64/updateinfo | 55 B 00:00:00

    (2/2): docker-ce-stable/x86_64/primary_db | 45 kB 00:00:00

    Resolving Dependencies

    --> Running transaction check

    ---> Package docker-ce.x86_64 3:19.03.12-3.el7 will be installed

    --> Processing Dependency: container-seLinux >= 2:2.74 for package: 3:docker-ce-19.03.12-3.el7.x86_64

    --> Processing Dependency: containerd.io >= 1.2.2-3 for package: 3:docker-ce-19.03.12-3.el7.x86_64

    --> Processing Dependency: docker-ce-cli for package: 3:docker-ce-19.03.12-3.el7.x86_64

    --> Running transaction check

    ---> Package container-seLinux.noarch 2:2.119.2-1.911c772.el7_8 will be installed

    ---> Package containerd.io.x86_64 0:1.2.13-3.2.el7 will be installed

    ---> Package docker-ce-cli.x86_64 1:19.03.12-3.el7 will be installed

    --> Finished Dependency Resolution

Dependencies Resolved

=====================================================================================================================================================

Package Arch Version Repository Size

Installing:

docker-ce x86_64 3:19.03.12-3.el7 docker-ce-stable 24 M

Installing for dependencies:

container-seLinux noarch 2:2.119.2-1.911c772.el7_8 extras 40 k

containerd.io x86_64 1.2.13-3.2.el7 docker-ce-stable 25 M

docker-ce-cli x86_64 1:19.03.12-3.el7 docker-ce-stable 38 M

Transaction Summary

Install 1 Package (+3 Dependent packages)

Total download size: 88 M

Installed size: 360 M

Downloading packages:

(1/4): container-seLinux-2.119.2-1.911c772.el7_8.noarch.rpm | 40 kB 00:00:00

warning: /var/cache/yum/x86_64/7/docker-ce-stable/packages/containerd.io-1.2.13-3.2.el7.x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID 621e9f35: NOKEY

Public key for containerd.io-1.2.13-3.2.el7.x86_64.rpm is not installed

(2/4): containerd.io-1.2.13-3.2.el7.x86_64.rpm | 25 MB 00:00:08

(3/4): docker-ce-19.03.12-3.el7.x86_64.rpm | 24 MB 00:00:08

(4/4): docker-ce-cli-19.03.12-3.el7.x86_64.rpm | 38 MB 00:00:07

Total 5.7 MB/s | 88 MB 00:00:15

Retrieving key from https://mirrors.aliyun.com/docker-ce/Linux/centos/gpg

Importing GPG key 0x621E9F35:

Userid : "Docker Release (CE rpm) <[email protected]>"

Fingerprint: 060a 61c5 1b55 8a7f 742b 77aa c52f eb6b 621e 9f35

From : https://mirrors.aliyun.com/docker-ce/Linux/centos/gpg

Running transaction check

Running transaction test

Transaction test succeeded

Running transaction

Installing : 2:container-seLinux-2.119.2-1.911c772.el7_8.noarch 1/4

setsebool: SELinux is disabled.

Installing : containerd.io-1.2.13-3.2.el7.x86_64 2/4

Installing : 1:docker-ce-cli-19.03.12-3.el7.x86_64 3/4

Installing : 3:docker-ce-19.03.12-3.el7.x86_64 4/4

Verifying : 1:docker-ce-cli-19.03.12-3.el7.x86_64 1/4

Verifying : 3:docker-ce-19.03.12-3.el7.x86_64 2/4

Verifying : containerd.io-1.2.13-3.2.el7.x86_64 3/4

Verifying : 2:container-seLinux-2.119.2-1.911c772.el7_8.noarch 4/4

Installed:

docker-ce.x86_64 3:19.03.12-3.el7

Dependency Installed:

container-seLinux.noarch 2:2.119.2-1.911c772.el7_8 containerd.io.x86_64 0:1.2.13-3.2.el7 docker-ce-cli.x86_64 1:19.03.12-3.el7

Complete!

[[email protected] Downloads]#

【配置docker】

[[email protected] Downloads]# mkdir /etc/systemd/system/docker.service.d

[[email protected] Downloads]# tee /etc/systemd/system/docker.service.d/kolla.conf << 'EOF'

[Service]

MountFlags=shared

EOF

[Service]

MountFlags=shared

[[email protected]st Downloads]# gedit /usr/lib/systemd/system/docker.service

[[email protected] Downloads]# cat -n /usr/lib/systemd/system/docker.service | grep "ExecStart=/usr/bin/dockerd"

14 # ExecStart=/usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock

15 ExecStart=/usr/bin/dockerd --registry-mirror=http://f2d6cb40.m.daocloud.io --storage-driver=overlay2

[[email protected] Downloads]#

[[email protected] Downloads]# systemctl daemon-reload

[[email protected] Downloads]# systemctl restart docker

[[email protected] Downloads]# systemctl enable docker

Created symlink from /etc/systemd/system/multi-user.target.wants/docker.service to /usr/lib/systemd/system/docker.service.

[[email protected] Downloads]# systemctl status docker

● docker.service - Docker Application Container Engine

Loaded: loaded (/usr/lib/systemd/system/docker.service; enabled; vendor preset: disabled)

Drop-In: /etc/systemd/system/docker.service.d

└─kolla.conf

Active: active (running) since Thu 2020-08-06 14:47:41 CST; 19s ago

Docs: https://docs.docker.com

Main PID: 15049 (dockerd)

CGroup: /system.slice/docker.service

└─15049 /usr/bin/dockerd --registry-mirror=http://f2d6cb40.m.daocloud.io --storage-driver=overlay2

Aug 06 14:47:41 queens dockerd[15049]: time="2020-08-06T14:47:41.122083617+08:00" level=info msg="scheme \"unix\" not registered, fallback...ule=grpc

Aug 06 14:47:41 queens dockerd[15049]: time="2020-08-06T14:47:41.122097173+08:00" level=info msg="ccResolverWrapper: sending update to cc:...ule=grpc

Aug 06 14:47:41 queens dockerd[15049]: time="2020-08-06T14:47:41.122125886+08:00" level=info msg="ClientConn switching balancer to \"pick_...ule=grpc

Aug 06 14:47:41 queens dockerd[15049]: time="2020-08-06T14:47:41.141777295+08:00" level=info msg="Loading containers: start."

Aug 06 14:47:41 queens dockerd[15049]: time="2020-08-06T14:47:41.301905206+08:00" level=info msg="Default bridge (docker0) is assigned wit...address"

Aug 06 14:47:41 queens dockerd[15049]: time="2020-08-06T14:47:41.348066992+08:00" level=info msg="Loading containers: done."

Aug 06 14:47:41 queens dockerd[15049]: time="2020-08-06T14:47:41.365263970+08:00" level=info msg="Docker daemon" commit=48a66213fe graphdr...19.03.12

Aug 06 14:47:41 queens dockerd[15049]: time="2020-08-06T14:47:41.365539161+08:00" level=info msg="Daemon has completed initialization"

Aug 06 14:47:41 queens dockerd[15049]: time="2020-08-06T14:47:41.382483505+08:00" level=info msg="API listen on /var/run/docker.sock"

Aug 06 14:47:41 queens systemd[1]: Started Docker Application Container Engine.

Hint: Some lines were ellipsized, use -l to show in full.

[[email protected] Downloads]# docker info

Client:

Debug Mode: false

Server:

Containers: 0

Running: 0

Paused: 0

Stopped: 0

Images: 0

Server Version: 19.03.12

Storage Driver: overlay2

Backing Filesystem: xfs

Supports d_type: true

Native Overlay Diff: true

Logging Driver: json-file

Cgroup Driver: cgroupfs

Plugins:

Volume: local

Network: bridge host ipvlan macvlan null overlay

Log: awslogs fluentd gcplogs gelf journald json-file local logentries splunk syslog

Swarm: inactive

Runtimes: runc

Default Runtime: runc

Init Binary: docker-init

containerd version: 7ad184331fa3e55e52b890ea95e65ba581ae3429

runc version: dc9208a3303feef5b3839f4323d9beb36df0a9dd

init version: fec3683

Security Options:

seccomp

Profile: default

Kernel Version: 3.10.0-1127.18.2.el7.x86_64

Operating System: CentOS Linux 7 (Core)

OSType: Linux

Architecture: x86_64

CPUs: 4

Total Memory: 7.62GiB

Name: queens

ID: Q7XP:46UW:WMHX:L25B:7XVZ:QX5Q:CZ2D:EBE3:HQ3J:X5DK:YDZN:KBS7

Docker Root Dir: /var/lib/docker

Debug Mode: false

Registry: https://index.docker.io/v1/

Labels:

Experimental: false

Insecure Registries:

127.0.0.0/8

Registry Mirrors:

http://f2d6cb40.m.daocloud.io/

Live Restore Enabled: false

[[email protected] Downloads]#

三 安装ansible

[[email protected] Downloads]# pip install --upgrade pip

Collecting pip

Downloading https://files.pythonhosted.org/packages/bd/b1/56a834acdbe23b486dea16aaf4c27ed28eb292695b90d01dff96c96597de/pip-20.2.1-py2.py3-none-any.whl (1.5MB)

100% |████████████████████████████████| 1.5MB 54kB/s

Installing collected packages: pip

Found existing installation: pip 8.1.2

Uninstalling pip-8.1.2:

Successfully uninstalled pip-8.1.2

Successfully installed pip-20.2.1

[[email protected] Downloads]# yum -y install ansible

Loaded plugins: fastestmirror, langpacks

Loading mirror speeds from cached hostfile

  • base: mirrors.aliyun.com
  • extras: mirrors.aliyun.com
  • updates: mirrors.aliyun.com

    Resolving Dependencies

    --> Running transaction check

    ---> Package ansible.noarch 0:2.9.10-1.el7 will be installed

    --> Processing Dependency: python-httplib2 for package: ansible-2.9.10-1.el7.noarch

    --> Processing Dependency: python-jinja2 for package: ansible-2.9.10-1.el7.noarch

    --> Processing Dependency: python-paramiko for package: ansible-2.9.10-1.el7.noarch

    --> Processing Dependency: python2-jmespath for package: ansible-2.9.10-1.el7.noarch

    --> Processing Dependency: sshpass for package: ansible-2.9.10-1.el7.noarch

    --> Running transaction check

    ---> Package python-jinja2.noarch 0:2.7.2-4.el7 will be installed

    --> Processing Dependency: python-babel >= 0.8 for package: python-jinja2-2.7.2-4.el7.noarch

    --> Processing Dependency: python-markupsafe for package: python-jinja2-2.7.2-4.el7.noarch

    ---> Package python-paramiko.noarch 0:2.1.1-9.el7 will be installed

    ---> Package python2-httplib2.noarch 0:0.18.1-3.el7 will be installed

    ---> Package python2-jmespath.noarch 0:0.9.4-2.el7 will be installed

    ---> Package sshpass.x86_64 0:1.06-2.el7 will be installed

    --> Running transaction check

    ---> Package python-babel.noarch 0:0.9.6-8.el7 will be installed

    ---> Package python-markupsafe.x86_64 0:0.11-10.el7 will be installed

    --> Finished Dependency Resolution

Dependencies Resolved

=====================================================================================================================================================

Package Arch Version Repository Size

Installing:

ansible noarch 2.9.10-1.el7 epel 17 M

Installing for dependencies:

python-babel noarch 0.9.6-8.el7 base 1.4 M

python-jinja2 noarch 2.7.2-4.el7 base 519 k

python-markupsafe x86_64 0.11-10.el7 base 25 k

python-paramiko noarch 2.1.1-9.el7 base 269 k

python2-httplib2 noarch 0.18.1-3.el7 epel 125 k

python2-jmespath noarch 0.9.4-2.el7 epel 41 k

sshpass x86_64 1.06-2.el7 extras 21 k

Transaction Summary

Install 1 Package (+7 Dependent packages)

Total download size: 20 M

Installed size: 115 M

Downloading packages:

(1/8): python-jinja2-2.7.2-4.el7.noarch.rpm | 519 kB 00:00:00

(2/8): python-markupsafe-0.11-10.el7.x86_64.rpm | 25 kB 00:00:00

(3/8): python-paramiko-2.1.1-9.el7.noarch.rpm | 269 kB 00:00:00

(4/8): python2-httplib2-0.18.1-3.el7.noarch.rpm | 125 kB 00:00:00

(5/8): python2-jmespath-0.9.4-2.el7.noarch.rpm | 41 kB 00:00:00

(6/8): python-babel-0.9.6-8.el7.noarch.rpm | 1.4 MB 00:00:00

(7/8): sshpass-1.06-2.el7.x86_64.rpm | 21 kB 00:00:00

(8/8): ansible-2.9.10-1.el7.noarch.rpm | 17 MB 00:00:03

Total 5.1 MB/s | 20 MB 00:00:03

Running transaction check

Running transaction test

Transaction test succeeded

Running transaction

Installing : sshpass-1.06-2.el7.x86_64 1/8

Installing : python2-httplib2-0.18.1-3.el7.noarch 2/8

Installing : python-babel-0.9.6-8.el7.noarch 3/8

Installing : python2-jmespath-0.9.4-2.el7.noarch 4/8

Installing : python-paramiko-2.1.1-9.el7.noarch 5/8

Installing : python-markupsafe-0.11-10.el7.x86_64 6/8

Installing : python-jinja2-2.7.2-4.el7.noarch 7/8

Installing : ansible-2.9.10-1.el7.noarch 8/8

Verifying : python-markupsafe-0.11-10.el7.x86_64 1/8

Verifying : ansible-2.9.10-1.el7.noarch 2/8

Verifying : python-paramiko-2.1.1-9.el7.noarch 3/8

Verifying : python2-jmespath-0.9.4-2.el7.noarch 4/8

Verifying : python-babel-0.9.6-8.el7.noarch 5/8

Verifying : python2-httplib2-0.18.1-3.el7.noarch 6/8

Verifying : sshpass-1.06-2.el7.x86_64 7/8

Verifying : python-jinja2-2.7.2-4.el7.noarch 8/8

Installed:

ansible.noarch 0:2.9.10-1.el7

Dependency Installed:

python-babel.noarch 0:0.9.6-8.el7 python-jinja2.noarch 0:2.7.2-4.el7 python-markupsafe.x86_64 0:0.11-10.el7

python-paramiko.noarch 0:2.1.1-9.el7 python2-httplib2.noarch 0:0.18.1-3.el7 python2-jmespath.noarch 0:0.9.4-2.el7

sshpass.x86_64 0:1.06-2.el7

Complete!

[[email protected] Downloads]#

[[email protected] Downloads]# git clone https://github.com/openstack/kolla-ansible -b stable/queens

Cloning into 'kolla-ansible'...

remote: Enumerating objects: 908, done.

remote: Counting objects: 100% (908/908), done.

remote: Compressing objects: 100% (627/627), done.

remote: Total 112062 (delta 514), reused 453 (delta 276), pack-reused 111154

Receiving objects: 100% (112062/112062), 20.60 MiB | 327.00 KiB/s, done.

Resolving deltas: 100% (73466/73466), done.

[[email protected] Downloads]# ls -F

epel-release-latest-7.noarch.rpm initCentOS7aliYUM.sh* VMwareTools-10.3.10-13959562.tar.gz

google-chrome-stable_current_x86_64.rpm kolla-ansible/ vmware-tools-distrib/

[[email protected] Downloads]# cd kolla-ansible/

[[email protected] kolla-ansible]# ls -F

ansible/ contrib/ doc/ kolla_ansible/ README.rst requirements.txt setup.py test-requirements.txt tools/

bindep.txt deploy-guide/ etc/ LICENSE releasenotes/ setup.cfg specs/ tests/ tox.ini

[[email protected] kolla-ansible]#

[[email protected] kolla-ansible]# tree -L 2 etc/

etc/

└── kolla

├── globals.yml

└── passwords.yml

1 directory, 2 files

[[email protected] kolla-ansible]#

[[email protected] kolla-ansible]# cp -r etc/kolla/ /etc/kolla/

[[email protected] kolla-ansible]# ls -F /etc/ | grep "kolla"

kolla/

[[email protected] kolla-ansible]# tree -L 3 /etc/k

kdump.conf kernel/ kolla/ krb5.conf krb5.conf.d/ ksmtuned.conf

[[email protected] kolla-ansible]# tree -L 3 /etc/kolla/

/etc/kolla/

├── globals.yml

└── passwords.yml

0 directories, 2 files

[[email protected] kolla-ansible]#

[[email protected] kolla-ansible]# cat -n ./requirements.txt

1 # The order of packages is significant, because pip processes them in the order

2 # of appearance. Changing the order has an impact on the overall integration

3 # process, which may cause wedges in the gate later.

4 pbr!=2.1.0,>=2.0.0 # Apache-2.0

5 docker>=2.4.2 # Apache-2.0

6 Jinja2!=2.9.0,!=2.9.1,!=2.9.2,!=2.9.3,!=2.9.4,>=2.8 # BSD License (3 clause)

7 six>=1.10.0 # MIT

8 oslo.config>=5.1.0 # Apache-2.0

9 oslo.utils>=3.33.0 # Apache-2.0

10 setuptools!=24.0.0,!=34.0.0,!=34.0.1,!=34.0.2,!=34.0.3,!=34.1.0,!=34.1.1,!=34.2.0,!=34.3.0,!=34.3.1,!=34.3.2,!=36.2.0,>=16.0 # PSF/ZPL

11 PyYAML>=3.10 # MIT

12 netaddr>=0.7.18 # BSD

13 cryptography!=2.0,>=1.9 # BSD/Apache-2.0

14 jmespath>=0.9.0 # MIT

[[email protected] kolla-ansible]#

[[email protected] kolla-ansible]# find / -name pip.conf

find: ‘/run/user/1000/gvfs’: Permission denied

/root/.config/pip/pip.conf

[[email protected] kolla-ansible]# cat -n /root/.config/pip/pip.conf

1 [global]

2 index-url = https://pypi.tuna.tsinghua.edu.cn/simple

3

[[email protected] kolla-ansible]#

[[email protected] kolla-ansible]# pip install . -i https://pypi.tuna.tsinghua.edu.cn/simple

....................................................................................................

ERROR: Cannot uninstall 'requests'. It is a distutils installed project and thus we cannot accurately determine which files belong to it which would lead to only a partial uninstall.

[[email protected] kolla-ansible]# pip install . -i https://pypi.tuna.tsinghua.edu.cn/simple --ignore-installed requests

....................................................................................................................

ERROR: After October 2020 you may experience errors when installing or updating packages. This is because pip will change the way that it resolves dependency conflicts.

We recommend you use --use-feature=2020-resolver to test your packages with the new resolver before it becomes the default.

rtslib-fb 2.1.69 requires pyudev>=0.16.1, but you'll have pyudev 0.15 which is incompatible.

ipapython 4.6.6 requires dnspython>=1.15, but you'll have dnspython 1.12.0 which is incompatible.

ipapython 4.6.6 requires python-ldap>=3.0.0b1, but you'll have python-ldap 2.4.15 which is incompatible.

Successfully installed Babel-2.8.0 Jinja2-2.11.2 MarkupSafe-1.1.1 PyYAML-5.3.1 backports.ssl-match-hostname-3.7.0.1 certifi-2020.6.20 cffi-1.14.1 chardet-3.0.4 contextlib2-0.6.0.post1 cryptography-3.0 debtcollector-1.22.0 docker-4.2.2 enum34-1.1.10 funcsigs-1.0.2 idna-2.10 importlib-resources-3.0.0 ipaddress-1.0.23 iso8601-0.1.12 jmespath-0.10.0 kolla-ansible-6.2.4.dev4 monotonic-1.5 netaddr-0.8.0 netifaces-0.10.9 oslo.config-7.0.0 oslo.i18n-3.25.1 oslo.utils-3.42.1 pathlib2-2.3.5 pbr-5.4.5 pycparser-2.20 pyparsing-2.4.7 pytz-2020.1 requests-2.24.0 rfc3986-1.4.0 scandir-1.10.0 setuptools-44.1.1 singledispatch-3.4.0.3 six-1.15.0 stevedore-1.32.0 typing-3.7.4.3 urllib3-1.25.10 websocket-client-0.57.0 wrapt-1.12.1 zipp-1.2.0

[[email protected] kolla-ansible]# pip install . -i https://pypi.tuna.tsinghua.edu.cn/simple --use-feature=2020-resolver

.....................................................................................................................

equirement already satisfied: ipaddress in /usr/lib/python2.7/site-packages (from cryptography!=2.0,>=1.9->kolla-ansible==6.2.4.dev4) (1.0.23)

Requirement already satisfied: six>=1.10.0 in /usr/lib/python2.7/site-packages (from kolla-ansible==6.2.4.dev4) (1.15.0)

[[email protected] kolla-ansible]#

四 配置/etc/kolla/globals.yml

[[email protected] kolla-ansible]# cp /etc/kolla/globals.yml{,.original}

[[email protected] kolla-ansible]# ls -F /etc/kolla/

globals.yml globals.yml.original passwords.yml

[[email protected] kolla-ansible]# gedit /etc/kolla/globals.yml

[[email protected] kolla-ansible]# grep "^\s[^# \t].$" /etc/kolla/globals.yml | cat -n

1 ---

2 kolla_base_distro: "centos"

3 kolla_install_type: "source"

4 openstack_release: "queens"

5 kolla_internal_vip_address: "10.89.127.123"

6 docker_namespace: "kolla"

7 network_interface: "ens33"

8 neutron_external_interface: "ens38"

9 enable_haproxy: "no"

10 nova_compute_virt_type: "qemu"

11 enable_freezer:"yes"

12 enable_heat:"yes"

13 enable_horizon_freezer:"{{ enable_freezer | bool }}"

14 enable_cinder: "yes"

[[email protected] kolla-ansible]#

【注意:如果是在虚拟机里安装 Kolla,希望可以在 OpenStack 平台上创建虚拟机,那么你需要在 globals.yml 文件中把 nova_compute_virt_type 配置项设置为 qemu,默认是 KVM。】

五 配置/etc/kolla/config/ceph.conf

[[email protected] kolla-ansible]# cat -n /etc/kolla/config/ceph.conf

cat: /etc/kolla/config/ceph.conf: No such file or directory

[[email protected] kolla-ansible]# touch /etc/kolla/config/ceph.conf

touch: cannot touch ‘/etc/kolla/config/ceph.conf’: No such file or directory

[[email protected] kolla-ansible]# mkdir -p /etc/kolla/config

[[email protected] kolla-ansible]# touch /etc/kolla/config/ceph.conf

[[email protected] kolla-ansible]# gedit /etc/kolla/config/ceph.conf

[[email protected] kolla-ansible]# grep "^\s[^# \t].$" /etc/kolla/config/ceph.conf | cat -n

1 [global]

2 osd pool default size = 1

3 osd pool default min size = 1

4 lsblk

5 parted /dev/sdc -s -- mklabel gpt mkpart KOLLA_CEPH_OSD_BOOTSTRAP 1 -1

[[email protected] kolla-ansible]#

[[email protected] kolla-ansible]# grep "^\s[^# \t].$" /etc/kolla/globals.yml | cat -n

1 ---

2 kolla_base_distro: "centos"

3 kolla_install_type: "source"

4 openstack_release: "queens"

5 kolla_internal_vip_address: "10.89.127.123"

6 docker_namespace: "kolla"

7 network_interface: "ens33"

8 neutron_external_interface: "ens38"

9 enable_haproxy: "no"

10 nova_compute_virt_type: "qemu"

11 enable_cinder: "yes"

12 enable_ceph: "yes"

13 enable_ceph_rgw: "yes"

14 enable_ceph_rgw_keystone: "yes"

[[email protected] kolla-ansible]#

六 安装kolla

[[email protected] kolla-ansible]# kolla-genpwd

/usr/lib64/python2.7/site-packages/cryptography/init.py:39: CryptographyDeprecationWarning: Python 2 is no longer supported by the Python core team. Support for it is now deprecated in cryptography, and will be removed in a future release.

CryptographyDeprecationWarning,

[[email protected] kolla-ansible]# cat -n /etc/kolla/passwords.yml

1 aodh_database_password: NGEJvWpwBREFW9It7WEmcCt8DF3RAs1vhwH4HbSo

2 aodh_keystone_password: hd0FTunq04VQnIMJtcMKIUp94gQFBcPsTgnyjwiG

.......................................................................................................................................

545 zun_keystone_password: q34MbRzy8tTj1jWtvgR1Qz6cKYalHf9yf5uV50sH

[[email protected] kolla-ansible]# cp /etc/kolla/passwords.yml{,.original}

[[email protected] kolla-ansible]# ls -F /etc/kolla/

config/ globals.yml globals.yml.original passwords.yml passwords.yml.original

[[email protected] kolla-ansible]#

[[email protected] kolla-ansible]# echo "keystone_admin_password: password" >> /etc/kolla/passwords.yml

[[email protected] kolla-ansible]# tail -5 /etc/kolla/passwords.yml

xenserver_password: sNUydA65P0sfsWjiCxvpp2Kqe64edV6F9huFkhjC

zfssa_iscsi_password: lTBzCUCeAW5UDFcKO4C2vRFU8wr5SrtZDQSmSYiE

zun_database_password: 4ZxKh2D4cb30tiFkx9FrQMPNnTYIsbbUHsvQsi3F

zun_keystone_password: q34MbRzy8tTj1jWtvgR1Qz6cKYalHf9yf5uV50sH

keystone_admin_password: password

[[email protected] kolla-ansible]#

[[email protected] kolla-ansible]# kolla-ansible pull

Pulling Docker images : ansible-playbook -i /usr/share/kolla-ansible/ansible/inventory/all-in-one -e @/etc/kolla/globals.yml -e @/etc/kolla/passwords.yml -e CONFIG_DIR=/etc/kolla -e action=pull /usr/share/kolla-ansible/ansible/site.yml

/usr/lib64/python2.7/site-packages/cryptography/init.py:39: CryptographyDeprecationWarning: Python 2 is no longer supported by the Python core team. Support for it is now deprecated in cryptography, and will be removed in a future release.

....................................................................................................................................

TASK [Pulling memcached image] **

fatal: [localhost]: FAILED! => {"changed": false, "msg": "Unknown error message: error pulling image configuration: Get https://production.cloudflare.docker.com/registry-v2/docker/registry/v2/blobs/sha256/ef/efa2f72f0dbea5644004dedf92d38d0866aafb56924ff383c979b7bfc5abb695/data?verify=1596710186-INAoHEa9f2j8h5eBOR5UlwqQx5c%3D: net/http: TLS handshake timeout"}

PLAY RECAP **

localhost : ok=3 changed=0 unreachable=0 failed=1 skipped=41 rescued=0 ignored=0

Command failed ansible-playbook -i /usr/share/kolla-ansible/ansible/inventory/all-in-one -e @/etc/kolla/globals.yml -e @/etc/kolla/passwords.yml -e CONFIG_DIR=/etc/kolla -e action=pull /usr/share/kolla-ansible/ansible/site.yml

[[email protected] kolla-ansible]# kolla-ansible deploy

......................................................................................................

{#创建环境变量,文件在/etc/kolla中

kolla-ansible post-deploy}

七 安装OpenStack的客户端工具python-openstackclient

[[email protected] kolla-ansible]# pip install python-openstackclient

DEPRECATION: Python 2.7 reached the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 is no longer maintained. pip 21.0 will drop support for Python 2.7 in January 2021. More details about Python 2 support in pip can be found at https://pip.pypa.io/en/latest/development/release-process/#python-2-support

Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple

Collecting python-openstackclient

Downloading https://pypi.tuna.tsinghua.edu.cn/packages/56/e9/eb6e88074b8c1f20a622b7cc7f7d1e4be0e81ddf22ceb49949f414bd52c6/python-openstackclient-5.2.1.tar.gz (722 kB)

|████████████████████████████████| 722 kB 1.7 MB/s

Requirement already satisfied: pbr!=2.1.0,>=2.0.0 in /usr/lib/python2.7/site-packages (from python-openstackclient) (5.4.5)

Requirement already satisfied: six>=1.10.0 in /usr/lib/python2.7/site-packages (from python-openstackclient) (1.15.0)

Requirement already satisfied: Babel!=2.4.0,>=2.3.4 in /usr/lib/python2.7/site-packages (from python-openstackclient) (2.8.0)

Collecting cliff!=2.9.0,>=2.8.0

Downloading https://pypi.tuna.tsinghua.edu.cn/packages/55/2f/f1484035545a36de978c686b90a6d81c0b09a8e3002faf761737eef54cdc/cliff-2.18.0-py2.py3-none-any.whl (79 kB)

|████████████████████████████████| 79 kB 2.5 MB/s

...................................................................................................................................

Successfully installed PrettyTable-0.7.2 appdirs-1.4.4 backports.functools-lru-cache-1.6.1 cliff-2.18.0 cmd2-0.8.9 decorator-4.4.2 dogpile.cache-0.9.2 jsonpatch-1.26 jsonpointer-2.0 keystoneauth1-4.0.1 msgpack-1.0.0 munch-2.5.0 openstacksdk-0.45.0 os-service-types-1.7.0 osc-lib-2.0.0 oslo.serialization-2.29.2 pyperclip-1.8.0 python-cinderclient-6.0.0 python-keystoneclient-3.22.0 python-novaclient-16.0.0 python-openstackclient-5.2.1 requestsexceptions-1.4.0 simplejson-3.17.2 unicodecsv-0.14.1 wcwidth-0.2.5

[[email protected] kolla-ansible]#

八 编辑/usr/share/kolla-ansible/init-runonce

[[email protected] kolla-ansible]# cp /usr/share/kolla-ansible/init-runonce{,.original}

[[email protected] kolla-ansible]# ls -F /usr/share/kolla-ansible/

ansible/ doc/ etc_examples/ init-runonce init-runonce.original init-**** openrc-example setup.cfg tools/

[[email protected] kolla-ansible]# gedit /usr/share/kolla-ansible/init-runonce

[[email protected] kolla-ansible]# cat -n /usr/share/kolla-ansible/init-runonce | grep "EXT_NET"

15 # This EXT_NET_CIDR is your public network,that you want to connect to the internet via.

16 EXT_NET_CIDR='10.89.127.0/24'

17 EXT_NET_RANGE='start=10.89.127.110,end=10.89.127.250'

18 EXT_NET_GATEWAY='10.89.127.254'

75 --allocation-pool ${EXT_NET_RANGE} --network public1 \

76 --subnet-range ${EXT_NET_CIDR} --gateway ${EXT_NET_GATEWAY} public1-subnet

[[email protected] kolla-ansible]#

九 加载OpenStack CLI所需的环境变量

source /etc/kolla/admin-openrc.sh

十 初始化部署

cd /usr/share/kolla-ansible/ && ./init-runonce

用浏览器访问Dashboard

Kolla-Ansible在线部署OpenStack

扫码领视频副本.gif

0

精彩评论

暂无评论...
验证码 换一张
取 消

关注公众号